OK so my Dreamline Lite arrived yesterday and after a full strip, clean and rebuild (with a few new Orings being required) it is working great
The trigger action and hammer were covered in metallic dust - but I found the remnants of a pellet in there and couldn't find any damage, so that was lucky.
Its a gen 1 with the bolt on Valve cap.
the bottle adapter is out of alignment so I have a selection of brass shims on order to fix that.
the stock is the right height for me but too short, so without going down the Ar15 stock road - are there any extenders for these?
thanks.

The trigger action and hammer were covered in metallic dust - but I found the remnants of a pellet in there and couldn't find any damage, so that was lucky.
Its a gen 1 with the bolt on Valve cap.
the bottle adapter is out of alignment so I have a selection of brass shims on order to fix that.
the stock is the right height for me but too short, so without going down the Ar15 stock road - are there any extenders for these?
thanks.
There are no replies made for this post yet.
Be one of the first to reply to this post!
Be one of the first to reply to this post!